Go to french website
Go to german website
Anechoic Chambers
Antennas
Attenuators
Calibration kits
Capabilities
Charges
Circulators
Coaxial adapters and connectors
Coaxial cords
Couplers
DC block
Delay lines
Detectors
Dielectric resonators
Diodes
Doublers
Equalizers
Filters
Frequency converters
Frequency synthesizers
GaN / GaAs transistors
GPS products
Hermetic connectors
Inductors
Insulators
Interposers
Limiters
Mixers
Modulators
Oscillators
PCB Prototyping
Phase shifters
Polarization tees
Power dividers
Quartz, TCXO, VCXO, OCXO
Radio frequency absorbers & shields
Radio frequency switch
Replacement of obsolescence
RF & microwave amplifiers
RF links on optical fibers
Rotating joints
Software
Substrate
Surge arresters
Thermoregulated plates
Thermoregulators
Transformers
Transition
VCO
YIG
Frequency converters are devices used in radio frequency (RF) or microwave frequency (HF) projects, which convert an alternating current of one frequency into an alternating current of another frequency. Frequency converters can also be used to modify voltage.
Accepting an intermediate frequency (IF) input signal in the range of 2 MHz to 70 MHz, MORF provides an RF output signal between 2 MHz and 3000 MHz with 5 kHz tuning resolution.
Additional features include 50 dB of attenuation control over the RF amplitude and two IF bandwidth options of 4 MHz and 35 MHz. The MORF is configurable via any serial terminal program or an optional graphical user interface (GUI)
01 34 94 20 40 - sales@tech-inter.eu
