Go to french website
Go to german website
Anechoic Chambers
Antennas
Attenuators
Calibration kits
Capabilities
Charges
Circulators
Coaxial adapters and connectors
Coaxial cords
Couplers
DC block
Delay lines
Detectors
Dielectric resonators
Diodes
Doublers
Equalizers
Filters
Frequency converters
Frequency synthesizers
GaN / GaAs transistors
GPS products
Hermetic connectors
Inductors
Insulators
Interposers
Limiters
Mixers
Modulators
Oscillators
PCB Prototyping
Phase shifters
Polarization tees
Power dividers
Quartz, TCXO, VCXO, OCXO
Radio frequency absorbers & shields
Radio frequency switch
Replacement of obsolescence
RF & microwave amplifiers
RF links on optical fibers
Rotating joints
Software
Substrate
Surge arresters
Thermoregulated plates
Thermoregulators
Transformers
Transition
VCO
YIG
PIN-PIN diode Limiter
EPL series
• 500 MHz to 18.0 GHz Admissible power
• 1 watts CW and 100 watts in pulse. (Pulse width of 1µsec, cycle of 0.1%, degradation of 20% at + 125 ° C)
Internal feedback
DC Time of fast recovery (typical 10 to 20 nsec)
Threshold limit above +12 dBm Typ. & less than +20 dBm typical output leakage
Leakage Low insertion loss Operating temperature range: -55 ° C to + 90 ° C
Storage temperature range: -65 ° C to + 125 ° C
Shock: 50 G, 11 msVibration: 20G, 100 to 2000Hz
Specifications @ + 25 ° C and -10 dBm input power Drop-in
Pin-Schottky limiting diode
ESL Series
• 500 MHz to 18.0 GHz Power handling capacity
• 1 Watt CW and 100 Watts peak (Pulse width of 1µsec, duty cycle of 0.1%, degraded to 20% at + 125 ° C)
Power capacity high Internal DC block
Recovery time: 200 µse Limit threshold above +4 dBm Typ. & low efficiency
Leakage Wideband frequency response
Operating temperature: -55 ° C to + 90 ° C
Shock: 50 G, 11 ms
Vibration: 20G, 100 to 2000Hz
Specification @ + 25 ° C and -10 dBm Input power Drop-in
01 34 94 20 40 - sales@tech-inter.eu